Liste der Anhänge anzeigen (Anzahl: 5)
Lomo RO501-1 100mm f2
Liebe Freunde der Projektionsobjektive,
ich möchte euch gerne das
Lomo RO501-1 100mm f2
Projektionsobjektiv vorstellen.
Es hat den allseits geliebten "schmächtigen" 62mm-Durchmesser und ist ein Klotz aus Metall und Glas.
Komplett aufschraubbar (dazu später noch mehr....:donk) und deshalb wartungsfreundlich,
ist mein Exemplar "wie neu. Keinerlei Kratzer oder Trübungen - wie eben vom Band gerollt.
Importiert habe ich es aus Lettland - also EU und zollfrei.
Das optische System sind 6 Linsen in 4 Gruppen.
Adaptiert ist es per 3D-Druck Schiebetubus mit M42-Anschluss,
an diesen habe ich einen M42 17-31mm-Helicoid angeschraubt und mit einem Slim-M42 auf E-Mount-Adapter kommt es an die Kamera.
So sieht die jackentaschenfreundliche :lolaway: Kombination aus:
Anhang 134115
Anhang 134116
Anhang 134117
Anhang 134118
Hier das Adapter-Stacking:
Anhang 134119
Liste der Anhänge anzeigen (Anzahl: 2)
Nachdem ich die Adaption fertig hatte, kam zuerst mal das pure Entsetzen bei mir.
So sahen die ersten Bilder aus:
#1
Anhang 134120
#2
Anhang 134121
NICHTS scharf, alles von Glow überlagert - also ich fand es entsetzlich.
Und das sollte das gleiche Objektiv sein,
das Hispan auf seinem Fotoblog so rühmt:
https://hispan.hu/lomo-100-2/
Dann erinnerte ich mich an die Geschichte hier mit irgendeinem Meostigmat -
die "geflügelten" Bokeh-Highlights waren mir in Erinnerung geblieben und auch, dass der Fehler damals ein Linsendreher war.
Also habe ich es aufgemacht, und ich musste die innere verkittete Gruppe sowie die Rücklinse drehen und den Abstandshalter "auf die andere Seite" machen -
dann passte alles....
Also entweder ein "Modding"-Fall oder in dem Fall wohl eher ein Versehen nach der Reinigung durch den Händler.
Natürlich hatte sich nun das Auflagemaß wieder verschoben - das musste ich dann endgültig anpassen.
Liste der Anhänge anzeigen (Anzahl: 2)
Gekauft habe ich das Objektiv,
weil es für Portraits außergewöhnlich gut sein soll - wie der Blogeintrag bei Hispan ja zeigt.
Und das ist es wirklich - ich habe bisher fast nur Bilder meiner Tochter gemacht,
aber auch meine Frau hat sich für 2 Aufnamen zur Verfügung gestellt,
die das Potential zeigen.
Es ist außergewöhnlich scharf und gut korrigiert - ohne extremen Randabfall.
Also vom Charakter her eher wie die Visonare, aber schärfer.
#3
Anhang 134122
#4
Anhang 134123
Liste der Anhänge anzeigen (Anzahl: 11)
Ich hatte das Objektiv in der Woche nach Ostern mit im Mannheimer Luisenpark,
in der Hoffnung auf Blütenpracht - die auch voll erfüllt wurde.
Starten möchte ich mit dem "Skulpturenweg" - wirklich schöne Kunstwerke in schönster Umgebung....
#5 Allgegenwärtig: der Fernsehturm...
Anhang 134124
#6
Anhang 134125
#7
Anhang 134126
#8 näher dran...
Anhang 134127
#9 ...und etwas weiter weg:
Anhang 134128
#10 ...und auch in SW ist das Rendering schön:
Anhang 134129
#11
Anhang 134130
#12 Auf weite Distanz ist es ebenso problemlos nutzbar:
Anhang 134131
#13
Anhang 134132
#14 + 15 "Wasserspiele" in der gleißenden Sonne sind kein Problem:
Anhang 134133
Anhang 134134
Wie man sieht, ist das Objektiv wirklich sehr scharf am Fokuspunkt und bis auf das Bokeh-Fringing sehr gut korrigiert -
und es malt sehr schön. Ihm gehen die üblichen Extremfehler wie starke Bildfeldwölbung der meisten Projektionsobjektive komplett ab -
Es verhält sich wie ein sehr gutes, lichtstarkes "normales Objektiv". :clapping
Liste der Anhänge anzeigen (Anzahl: 17)
@Gladstone: Wir leisten unseren Beitrag zur Unterstützung der Wirtschaft unserer osteuropäischen Partner :lol:
Glückwunsch - du wirst viel Freude damit haben!
BTT: Meine Hoffnung auf Blütenpracht wurde jedenfalls nicht enttäuscht.
#16 + #17 Im Luisenpark habe ich dann einen sehr interessanten Baum gefunden:
Den Schnullerbaum :lol:
Anhang 134175
Anhang 134176
#18
Anhang 134177
#19
Anhang 134178
#20
Anhang 134179
#21
Anhang 134180
#22
Anhang 134181
#23
Anhang 134182
#24
Anhang 134183
#25
Anhang 134184
#26
Anhang 134185
#27
Anhang 134186
#28
Anhang 134187
#29
Anhang 134188
#30
Anhang 134189
#31
Anhang 134190
#32
Anhang 134191
Entschuldigt bitte den "leichten" Blümchen-Exzess -
aber das Rendering ist in meinen Augen einfach zu schön :clapping
Liste der Anhänge anzeigen (Anzahl: 6)
Das Objektiv kann deutlich mehr als nur Blümchen -
so z.B. auch Vögel aller Art :lol:
#33 Schon eine enorme Auflösung, die das Objektiv erbringt auch auf lange Distanzen
Anhang 134404
#34
Anhang 134405
#35
Anhang 134406
#36
Anhang 134407
#37
Anhang 134408
#38 ...und Eichhörnchen im Farbrausch gehen auch :lolaway:
Anhang 134409
Das ist schon spitzenmäßig - nicht nur für ein Projektionsobjektiv. :yes:
Liste der Anhänge anzeigen (Anzahl: 13)
Wenn die Sonne richtig steht,
kann man dem Lomo auch einen tollen, streifigen Flare-Effekt entlocken:
#39
Anhang 134449
#40
Anhang 134450
Überrascht am Lomo hat mich immer wieder die Leistungsfähigkeit auch auf große Distanzen.
Die meisten anderen Projektionsobjektive brechen da ja regelrecht ein.
#41
Anhang 134451
#42 Fokus auf der roten Laterne unterhalb des Daches
Anhang 134452
#43
Anhang 134453
#44
Anhang 134454
#45
Anhang 134455
#46
Anhang 134456
#47
Anhang 134457
#48
Anhang 134458
#49
Anhang 134459
#50
Anhang 134461
#51
Anhang 134460
Liste der Anhänge anzeigen (Anzahl: 9)
Hallo Niko,
ich hoffe ich darf diesen Thread kapern, denn ich habe zwar nicht das baugleiche LOMO 2/100mm, aber den
grossen Bruder, nämlich das 2/120mm.
Hier war die Adaption schon eine gewisse Herausforderung, da der Durchmesser nicht ganz ohne ist und es
quasi keine "Angriffsflächen" für eine Adaption gibt.
Glücklicherweise bin ich dann doch fündig geworden.
Dreht man den hinteren Sicherungsring heraus, kann man wunderbar einen Step-up Ring 67 --> 72mm versenken,
sofern man das Gewinde (72mm) sorgfältig herunterfeilt. Anschließend schraubt man den Sicherungsring
wieder drauf und dann kann man mittels weiterer Step-up Ringe (62 --> 67mm und 58 --> 62mm) das LOMO
direkt mit dem grossen Helicoid Adapter verbinden. Zwischen Helicoid (kameraseitig mit M42 Gewinde ausgestattet)
und Adapter M42 auf NEX habe ich noch zwei Distanzringe (M 42) geschraubt um den Unendlichfokus ohne
zuviel Backfokus zu ermöglichen.
Hier sind die Zutaten:
Anhang 135936
Das ist der Sicherungsring mit bereits eingesetztem Step-up Ring:
Anhang 135937
Fertig:
Anhang 135938
Und das kann es:
Anhang 135939
Anhang 135940
Anhang 135941
Anhang 135942
Anhang 135943
Anhang 135944
Auch von mir: für Fans von Projektionsoptiken eine absolute Kaufempfehlung! Und ja, ich habe viel Dreck auf dem Sensor... :donk
LG, Christian
Liste der Anhänge anzeigen (Anzahl: 6)
Ich habe das Lomo RO501-1 100mm f2 ja gekauft,
weil ich es als Portraitobjektiv verwenden will.
Bei einem Shooting vor ein paar Wochen musste es sich dann beweisen:
#52
Anhang 137039
#53
Anhang 137040
#54
Anhang 137041
#55
Anhang 137042
#56
Anhang 137043
#57
Anhang 137044
Was soll ich dazu jetzt sagen :beten: - perfekte Mischung aus Schärfe und Weichheit in den Hintergründen.
Ein genialer Glasbrocken!